Commercial · Kansas City, KS
When a commercial coating fails, it usually starts with poor epoxy floor prep, not the topcoat. Elite Epoxy Kansas City has served since 2018, delivering concrete grinding and shot blasting that builds the right surface profile for long-lasting epoxy systems in Kansas City, KS.
Proper prep starts with the slab and the bond line. We evaluate concrete hardness, surface laitance, existing coatings, oil contamination, curing compounds, and moisture risk, then choose mechanical preparation that matches your system. For most commercial jobs we target ICRI CSP 2-5 depending on whether you are installing thin-mil epoxy, a build coat, or a broadcast quartz or flake system. Grinding with diamond tooling and vacuum-assisted dust control removes weak concrete and levels high spots, while shot blasting opens the cap, strips thin coatings, and creates uniform tooth for primers, epoxies, and polyaspartics.
Kansas City facilities see wide humidity swings, freeze-thaw cycles at entryways, and de-icing salts that drive moisture and chlorides into concrete, so we plan prep around real site conditions. We test for moisture vapor transmission and alkalinity when needed, detail cracks and control joints with the right repair materials (epoxy crack filler, polyurea joint fill, or cementitious patch), and address spalls and pop-outs before coating. Surface flatness and texture are dialed in for your finish, from smooth epoxy in clean rooms and retail to more aggressive profiles for heavy-duty broadcast systems in warehouses and manufacturing. If the slab has adhesive residue, paint, or old epoxy, we remove it mechanically instead of relying on acid etching, which can leave salts and inconsistent bonding.
Customers choose us because we treat prep as a specification, not a shortcut. We run commercial-grade grinders and shot blasters with HEPA-filtered vacuums to keep dust down, protect adjacent operations, and meet jobsite safety expectations. Every project gets a clear scope for CSP target, edge work, transitions, crack and joint treatment, and coating compatibility so general contractors, facility managers, and owners know exactly what is being built. You get a crew that shows up on schedule, maintains clean containment, and communicates issues early, especially when we uncover soft concrete, hidden coatings, or moisture problems.
Before we coat, we walk the floor with you and confirm the profile, cleanliness, and repairs, then document any exclusions or slab issues that affect performance. You receive a free written estimate, a prep plan tied to your coating system, and straightforward options if the slab needs extra remediation like moisture mitigation primer or deeper profiling. After prep, we can install commercial epoxy, urethane cement, or polyaspartic systems with the right primers and broadcast methods for slip resistance and durability. The result is a floor that bonds properly, wears evenly, and is easier to maintain because the foundation was built correctly.
Yes. We carry insurance and provide written estimates that spell out prep, materials, and cure times so you know what you are getting.
Sometimes, but only after proper removal and evaluation. We typically diamond-grind to remove loose coatings and create a fresh profile, then spot-prime and rebuild the system for reliable adhesion.
Yes. We can adjust texture with full flake, quartz, or anti-slip additives like aluminum oxide, balancing traction with cleanability for the space.
It depends on the system, but many installs land in the 15-30+ mil range across base coat(s) and topcoat(s). We recommend the build based on traffic, tires, and chemical exposure.
A properly prepped slab with a quality epoxy base coat and the right topcoat greatly reduces hot-tire pickup. Tire plasticizers, moisture, and inadequate prep are the common causes when it happens.
Epoxy floor prep is the make-or-break step for commercial floor coatings, because epoxy, urethane cement, and polyaspartic systems only perform as well as the concrete surface they bond to. Elite Epoxy Kansas City focuses on mechanical preparation, concrete grinding, and shot blasting that create the correct surface profile, remove weak concrete, and set your project up for predictable adhesion and long service life.
Commercial slabs often have hidden variables that basic cleaning cannot fix, including curing compounds, sealers, tire rubber, oil staining, adhesive residue, and thin paint layers. Mechanical prep removes contamination and laitance instead of smearing it across the surface. We select diamond grit sequences for the target finish, detail perimeter edges with hand grinders, and use shot blasting when the job calls for consistent texture across large square footage. The goal is simple, clean concrete with a repeatable profile so primers wet out and lock in.
When conditions demand it, we incorporate moisture mitigation primers and compatible repair materials so the coating system stays bonded under forklifts, pallet jacks, and chemical exposure. Control joints and random cracks are addressed with epoxy or polyurea fillers based on movement expectations, then flushed and re-profiled so the finished floor looks uniform. For broadcast quartz or flake, we prep to support full coverage and even rejection, then backroll and scrape vacuum before topcoats for a dense, easy-to-clean surface.
If you are planning a new commercial epoxy floor or re-coating an older slab, start with a prep consultation and a written scope. We will recommend grinding, shot blasting, or a combination approach, set the CSP target, and outline repairs so you know what you are paying for and why. The result is epoxy floor prep that supports adhesion, appearance, and durability, not a coating that fails early because the concrete was never properly prepared.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Kansas City. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
