Residential · Kansas City, KS
If your epoxy garage floor is peeling, stained, or cracked, the fix starts with proper concrete prep and the right coating system. Elite Epoxy Kansas City has served Kansas City since 2018, installing and repairing garage floors built for hot tires, road salt, and daily wear.
Prep is the job. We start with a moisture check, inspect cracks, spalls, and control joints, then mechanically profile the slab with diamond grinding (typically CSP 2-3) using HEPA dust control. Oil and tire-plasticizer contamination get degreased and rinsed, failing coatings are removed, and cracks are repaired with epoxy crack filler or polyurea joint material depending on movement. For weak or pitted concrete, we skim with an epoxy mortar and re-grind flat so the coating bonds to sound concrete, not dust or old paint.
Kansas City garages see freeze-thaw, de-icing salts, humidity swings, and water intrusion from melted snow, so we build systems that resist moisture vapor and abrasion. Where conditions call for it, we install a moisture-mitigating epoxy primer and broadcast aggregate to refusal for mechanical lock. Finish options include solid-color epoxy, decorative vinyl flake broadcast, or quartz for added slip resistance, then a UV-stable polyaspartic or polyurethane topcoat to reduce ambering and improve chemical resistance. We dial in sheen and traction with aluminum oxide or polymer grit so the floor is easier to clean without being slick when wet.
Customers choose us because we do epoxy garage floor work like a concrete coating contractor, not a painter. You get clear prep standards, straightforward system recommendations, and a written scope that spells out grinding, crack repair, coating build, and cure times. We are licensed and insured, show up on schedule, and protect your walls, door tracks, and transitions with proper masking and clean edges. If the issue is a failed DIY kit, hot-tire pickup, or peeling from poor prep, we can diagnose the cause and repair it the right way instead of coating over it.
Before we wrap up, we walk the floor with you and verify coverage, edge lines, and texture, including around steps, stems, and expansion joints. You receive a care sheet with cure timeline (light foot traffic, vehicle return, and chemical exposure), cleaning recommendations (pH-neutral cleaner, microfiber mop), and what to avoid (harsh acids, metal blades). We also document the system used, color or flake blend, and topcoat type so future touch-ups match. The result is an epoxy garage floor that looks finished, cleans fast, and stands up to real garage use.
Yes. We carry insurance and provide written estimates that spell out prep, materials, and cure times so you know what you are getting.
Sometimes, but only after proper removal and evaluation. We typically diamond-grind to remove loose coatings and create a fresh profile, then spot-prime and rebuild the system for reliable adhesion.
Yes. We can adjust texture with full flake, quartz, or anti-slip additives like aluminum oxide, balancing traction with cleanability for the space.
It depends on the system, but many installs land in the 15-30+ mil range across base coat(s) and topcoat(s). We recommend the build based on traffic, tires, and chemical exposure.
A properly prepped slab with a quality epoxy base coat and the right topcoat greatly reduces hot-tire pickup. Tire plasticizers, moisture, and inadequate prep are the common causes when it happens.
A long-lasting epoxy garage floor depends on concrete prep, moisture control, and a coating system matched to how you use the space. Elite Epoxy Kansas City installs new systems and repairs failed coatings for homeowners, shops, and light industrial garages across Kansas City, KS, with options from solid-color epoxy to full flake broadcast floors with UV-stable topcoats.
Many garage floor failures come from coating over smooth concrete, trapped moisture vapor, or contamination from oil and tire residue. Our process starts with evaluating the slab condition, checking for previous sealers or paint, and setting the right concrete surface profile with professional grinders and dust control. From there, we select the correct epoxy primer and build coat, then broadcast flake or quartz if you want added texture and a more finished look. We finish with a protective clear topcoat, commonly polyaspartic or polyurethane, to improve abrasion resistance and reduce yellowing from sunlight at the door opening.
Need epoxy garage floor repair instead of a full replacement? We can remove peeling areas, re-profile the concrete, rebuild low spots, and recoat to restore adhesion and appearance. Cracks and control joints are treated differently because joints are designed to move, so we discuss whether to fill, armor, or leave them as designed based on your goals. If moisture is driving the failure, we address it first so the new coating lasts.
Whether you want a clean, bright solid gray floor or a full flake broadcast system that hides dirt and tire marks, we will recommend a system that fits your budget and timeline. Request a free written estimate to compare options, understand expected downtime, and get an epoxy garage floor that performs like it should.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Kansas City. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
